Tools  90° T-Joint Notches   -Econo Arc-Fit - Good   -Arc-Fit - Better       -Arc-Fit Sample Parts   -Arc-Twin - Best      -Arc-Twin Sample PartsDouble Notch - HighVolumeAngled Notching Miter Tube EndsPierce Tubing V & Side NotchingFence Tools  -Notch Tubes  -Cut Tubes- New  -Form Pickets  -Pierce Channel & TubeCut Tubing - High VolumeCut Flat Stock / Angle / BarCustom Die ExamplesCustom Part ExamplesAbrasive Belt CoperHand & Power PressesOnline Outlet - Clearance
Literature & Info       Vogel 2010 Catalog 
     
Vogel 2010 Price List       Tool Sharpening ServicesChart: Tubing GaugesChart: Pipe SchedulesChart: Electrical ConduitTerms & ConditionsOrdering & PaymentShippingOrganizationsDealersPublicationsIndustries Served

End Forming

TUBE END FORMING MACHINE

TUBE END FORMING MACHINE This versatile and simple to operate machine is 440V, foot-pedal actuated.

One hydraulic cylinder clamps the tube, while a second horizontally mounted cylinder moves a forming punch over or into tube end, creating various end forms, as illustrated below. Each change of tube size, gauge, or end form requires a separate set of tooling.

The machine can reduce up to 3" of tube end (adjustable when a shorter length of reduction desired).

Machine features 5HP motor, 12 gallon hydraulic reservoir. Cycle time is approx. 3 - 5 seconds.

Note: We have discontinued this machine and have (1) left in inventory.  We will continue to fully support this machine and previously sold machines included tool sharpenining, tool replacement and machine components, such as replacement cylinders, powerpacks, PLC, etc., (as with all Vogel equipment, components we purchase are subject to vendor availability)


Vogel Self-Contained Endforming Machines

Model

Price (less tooling)

Max. Capacity

Size

Approx. Weight

Specs

OD

Wall

L to R 

F to B

EM 1.25

Was $15,950.00

WEBSITE SPECIAL
Now $12,225.00

1-1/4" .083 30" 22" 875 5HP Motor 440V, 3PH, 60HZ 12 Gallon Reservoir
 

Limited time only  
Subject to prior sale

Examples of end forms that can be produced with above machine.  Tooling sold separately

Reduction Bellmouth Flare 90° Flange Flare

 Tooling for this application $4,500.00

 Tooling for this application $5,500.00

  Tooling for this application $5,500.00

  Tooling for this application $5,500.00

Reduction Bellmouth Flare 90° Flange Flare
Vogel Tool & DieA Divison of T-E-S Equipment, Inc.Tube & Pipe Fabricating Tools, Dies & Equipment