Request for Quote

You can send your request via mail, fax or email.  When requesting a quote, please provide the following information:

Contact Information  

• Your name
• Company Name
• Phone & Fax numbers
• Mailing Address

Material Information

• Tube Size & Gauge
• Material (mild steel, stainless, aluminum, etc.)
• Any previous processing performed to the material prior to use in our tool (saw cut, annealed, flattened, etc.)

Application Information

• All dimensions for features to be created by our tools
• How is location of each feature to be gauged
• Critical and non-critical dimensions

For Hole Piercing

• Indicate one or both walls (through holes)
• Indicate if one or both holes can be dimpled
• When a clean (no dimple) hole is pierced through both walls, the exit hole (bottom wall) is larger, typically up to 25% of the tube's wall thickness. Please advise if this is acceptable, because if not, alternate means of piercing can be quoted, but at a higher cost. and / or additional operations.

File Formats

• PDF - [Preferred]
• AutoCad 2002 or earlier versions (we do NOT use 3D)
• JPG / BMP / GIF / TIFF graphic files
• Email drawings to: info@vogeltool.com

If Faxing

• Please insure that print is large enough size for dimensions and features to be legible.

Note that because of templates used to create our quotes, whether you fax or email your quote request, we will reply via fax. If you are unable to receive faxes, we will be happy to mail our quote to your attention. Please provide instructions with your quote request.

Thank you for providing as much information as possible to help us accurately quote your project needs. Of course, if you have any questions, please feel free to contact us to discuss your application details.