Additional information
| Weight | 400 lbs |
|---|
Supercharge Your Pipe Notching with 25 Tons of Power
Vogel Arc-Fit 120V Power Notching Tool – Find out why more and more shops are investing in power equipment to make pipe notching even easier. Our power press is 120V and plugs into the wall with a three prong plug (20 amp dedicated circuit recommended). Small enough to bench-top mount, this press features a covered foot switch with a 6′ cord, so your hands can stay on the pipe to be notched. Note that the stand shown in the video is no longer available.
Our turntable allows you to keep three different size Arc-Fit assemblies installed. Simply rotate to select the size you need. No more wasted changeover time, no lost parts. The turntable removes with one bolt so you can set it aside, fully assembled, and use this press to power other Vogel tools for applications like notching on an angle, pressing spear-point pickets, 90 degree notching of larger pipe up to 3-1/2″ OD and more.
April 2023: Due to recent increases in fuel costs, there are significant fuel surcharges being added to shipping costs. Until further notice, we are suspending our flat rate shipping for our power notching package. Shipping charges will be based on actual costs and will typically range from $400 – $600 for shipping within the continental United States.
Selecting the Right Size Assembly
- Our Assembly part number 9202A is for 1″ pipe = 1.315″ outside diameter, commonly called 1-3/8″ pipe
- Our Assembly part number 9203 is 1-1/4″ pipe = 1.66″ outside diameter, commonly called 1-5/8″ pipe
- Our Assembly part number 9204 1-1/2″ pipe = 1.90″ outside diameter, commonly called 1-7/8″ or 2″pipe
- Our Assembly part number 9205 2″ pipe = 2.375″ outside diameter, commonly called 2-3/8″ pipe
The tools you can select from for this tool package are designed for schedule 40 pipe. If you are working with a thinner wall – no problem! If if you need to notch heavier wall (schedule 80 or sometimes called extra-heavy or oil field pipe you’ll need a different notcher).
Our turntable has a maximum capacity of 2-3/8″ OD. However, we also offer tools for tubing sizes, larger sizes up to 6″ OD, custom notchers for square tubes to fit round, round tubes to fit and different size and much more! Please contact us to discuss your specific notching needs and we’ll be happy to help.
An Industry Favorite
Vogel tools have always been proudly made in the USA. Our Arc-Fit notching tools were our first product – over 80 years ago! Learn more about the history of Vogel and view the original patent.
Supercharge Your Pipe Notching with 25 Tons of Power
Vogel Arc-Fit 120V Power Notching Tool – Find out why more and more shops are investing in power equipment to make pipe notching even easier. Our power press is 120V and plugs into the wall with a three prong plug (20 amp dedicated circuit recommended). Small enough to bench-top mount, this press features a covered foot switch with a 6′ cord, so your hands can stay on the pipe to be notched. Note that the stand shown in the video is no longer available.
Our turntable allows you to keep three different size Arc-Fit assemblies installed. Simply rotate to select the size you need. No more wasted changeover time, no lost parts. The turntable removes with one bolt so you can set it aside, fully assembled, and use this press to power other Vogel tools for applications like notching on an angle, pressing spear-point pickets, 90 degree notching of larger pipe up to 3-1/2″ OD and more.
April 2023: Due to recent increases in fuel costs, there are significant fuel surcharges being added to shipping costs. Until further notice, we are suspending our flat rate shipping for our power notching package. Shipping charges will be based on actual costs and will typically range from $400 – $600 for shipping within the continental United States.
Selecting the Right Size Assembly
- Our Assembly part number 9202A is for 1″ pipe = 1.315″ outside diameter, commonly called 1-3/8″ pipe
- Our Assembly part number 9203 is 1-1/4″ pipe = 1.66″ outside diameter, commonly called 1-5/8″ pipe
- Our Assembly part number 9204 1-1/2″ pipe = 1.90″ outside diameter, commonly called 1-7/8″ or 2″pipe
- Our Assembly part number 9205 2″ pipe = 2.375″ outside diameter, commonly called 2-3/8″ pipe
The tools you can select from for this tool package are designed for schedule 40 pipe. If you are working with a thinner wall – no problem! If if you need to notch heavier wall (schedule 80 or sometimes called extra-heavy or oil field pipe you’ll need a different notcher).
Our turntable has a maximum capacity of 2-3/8″ OD. However, we also offer tools for tubing sizes, larger sizes up to 6″ OD, custom notchers for square tubes to fit round, round tubes to fit and different size and much more! Please contact us to discuss your specific notching needs and we’ll be happy to help.
An Industry Favorite
Vogel tools have always been proudly made in the USA. Our Arc-Fit notching tools were our first product – over 80 years ago! Learn more about the history of Vogel and view the original patent.
Description
Supercharge Your Pipe Notching with 25 Tons of Power
Vogel Arc-Fit 120V Power Notching Tool – Find out why more and more shops are investing in power equipment to make pipe notching even easier. Our power press is 120V and plugs into the wall with a three prong plug (20 amp dedicated circuit recommended). Small enough to bench-top mount, this press features a covered foot switch with a 6′ cord, so your hands can stay on the pipe to be notched. Note that the stand shown in the video is no longer available.
Our turntable allows you to keep three different size Arc-Fit assemblies installed. Simply rotate to select the size you need. No more wasted changeover time, no lost parts. The turntable removes with one bolt so you can set it aside, fully assembled, and use this press to power other Vogel tools for applications like notching on an angle, pressing spear-point pickets, 90 degree notching of larger pipe up to 3-1/2″ OD and more.
April 2023: Due to recent increases in fuel costs, there are significant fuel surcharges being added to shipping costs. Until further notice, we are suspending our flat rate shipping for our power notching package. Shipping charges will be based on actual costs and will typically range from $400 – $600 for shipping within the continental United States.
Selecting the Right Size Assembly
- Our Assembly part number 9202A is for 1″ pipe = 1.315″ outside diameter, commonly called 1-3/8″ pipe
- Our Assembly part number 9203 is 1-1/4″ pipe = 1.66″ outside diameter, commonly called 1-5/8″ pipe
- Our Assembly part number 9204 1-1/2″ pipe = 1.90″ outside diameter, commonly called 1-7/8″ or 2″pipe
- Our Assembly part number 9205 2″ pipe = 2.375″ outside diameter, commonly called 2-3/8″ pipe
The tools you can select from for this tool package are designed for schedule 40 pipe. If you are working with a thinner wall – no problem! If if you need to notch heavier wall (schedule 80 or sometimes called extra-heavy or oil field pipe you’ll need a different notcher).
Our turntable has a maximum capacity of 2-3/8″ OD. However, we also offer tools for tubing sizes, larger sizes up to 6″ OD, custom notchers for square tubes to fit round, round tubes to fit and different size and much more! Please contact us to discuss your specific notching needs and we’ll be happy to help.
An Industry Favorite
Vogel tools have always been proudly made in the USA. Our Arc-Fit notching tools were our first product – over 80 years ago! Learn more about the history of Vogel and view the original patent.
90 Degree Arc-Fit “T” Joints on Pipe and Tubing
I need to notch more than one size tubing, how many Arc-Fit units do I need?
The Arc-Fit Housing will accept many different assemblies, up to the maximum capacity listed. If your next application is for a larger tube, then a new, larger housing must be purchased. Changeover time is about 5 – 10 minutes.
If you use our Hand Press and change sizes frequently, purchasing one housing for each assembly will save time (and lost or mis-installed tooling). Removing the Housing with the assembly still inside, requires loosening only one bolt and can be done in seconds.
We also offer a power press, our CSP-25-SA 110V Power Unit, which has an optional 3-Housing turntable option. This lets you be permanently set up for three different notching applications, and only require you to rotate the base to select the needed side.
How do I line up the second notch?
If you look at our Arc-Fit Assemblies, you’ll notice to vertical, parallel lines on the Punch Holder. When you rotate the tube or pipe upside down for the second notch, these lines will mate with the edges of the notch, providing a visual aid to help you rotate the tube correctly. Note that our Arc-Twin tooling will notch both walls in one stroke and orientation is guaranteed.
How do I sharpen Arc-Fit tooling?
We recommend you send your Arc-Fit tooling to Vogel for sharpening. Note that both the Punch and Die are cutting edges, like the two halves of a scissors. Please see our page on sharpening for instructions on returning your tools to Vogel for sharpening.
What do the numbers stamped into my tooling mean?
We assign an Assembly number that is marked into the Punch, Punch Holder and Die of your Arc-Fit tooling. This number will either be Four digits long, beginning with a 9, or five digits long and begin with a 1. There may be an “A” at the end of the part number. All three parts have the same number (Note if your assembly was custom made, we may use a stock Punch Holder and mark the unique assembly number only on the Punch & Die). Because all three parts have the same number, it is easy to make sure you are using the correct parts together. When ordering replacements, be sure to specify whether you wish a new Assembly (three pieces) or wish to order individual parts only (just a punch, for example). If you have several Vogel tools and are not sure of what sizes they are for, you can contact us with the markings on your tool.
Reviews
There are no reviews yet.