Mitered Joint Units
MITRE-SNUG MITRE UNITS
For mitering round, square, oval or rectangular tubing to at one specific angle.Specify notched tube OD & gauge, and angle of miter. A drainhole may also be notched at the same time, if desired.
Vogel Mitre-Snug units produce clean accurate mitred joints that do not require the deburring that is associated with saw or abrasive cutting.
Mitre-Snugs use the same Housings as the Arc-Snugs and are practically identical in operation.
The first stroke removes the deep part of the notch. The part is then rotated upside down and put into the second station at the correct angle (to the vertical). The punch gauges on the first notch and shears the walls on the sides and bottom. If two parts are loaded at one time a complete end is produced in each press stroke. |
 |
| Mitre-Snug Tooling |
| Housing |
Price (less tooling) |
Capacity (Max) |
Size |
Approx. Weight |
Press Requirements |
| O.D. |
Sq. |
Wall |
L to R |
F to B |
Shut |
Stroke |
Tons |
| #400 |
$1,295.00 |
1-1/4" |
1-1/4" |
.125 |
12" |
9" |
95 |
6" |
2" |
30 |
| #450 |
$1,850.00 |
2" |
2" |
.187 |
12" |
12" |
147 |
7-1/2" |
3" |
35-40 |
| #500 |
$2,995.00 |
3" |
3" |
.250 |
13" |
12" |
210 |
10 1/2" |
4" |
60-80 |
Mitre-Snug tooling is designed to be sharpenable for long life. Many customers order replacement parts first, then when received, send the old parts in for sharpening. This avoids any downtime and eliminates any expense for rush processing, overnight shipping, etc. Please contact us to obtain replacement part costs.
Frequently Asked Questions
|