Pierce Channel & Tube
Tooling for the Fence Industry
 To pierce channel or square tubing we offer two channel piercing tools (CHP) and a tool for piercing square tubing (THP) that although designed for square tubing can also pierce channel, for more versatility. Our THP unit will dimple the top wall of square tubing, leaving a clean exit hole on the bottom wall. When assembling your fence panel, you can face the dimpled side downward and / or fill with weld for improved appearance. Our Stop Assembly will allow you to control your hole spacing between each pierced hole, up to 8" max., fully adjustable. These tools will fit Vogel's CSP-25-SA Hydraulic Power unit.
 |
 |
| THP Unit |
35 CHP Unit w/optional stop assembly |
| Tube & Channel Piercing Tools |
| Model |
Price |
Capacity (Max) |
Maximum Hole size |
Size |
Approx. Weight |
Press Requirements |
| Material |
Size |
Wall |
L to R |
F to B |
Shut |
Stroke |
Tons |
| 35 CHP |
$1,495.00 |
Channel |
1/2" x 1-1/4" x 1/2" |
1/8" |
17/32"SQ |
4-1/2" |
3-5/8" |
14 |
5" |
7/16" |
7 |
| 75 CHP |
$3,775.00 |
Channel |
1" x 2" x 1" |
3/16" |
1-1/4" SQ |
8" |
6" |
50 |
6" |
1" |
30 |
| THP |
$4,995.00 |
Square Tubing or Channel |
1-1/2" SQ 1-1/2" x 1-1/2" |
1/8" |
1-1/4" SQ |
9-1/2" |
3-3/4" |
50 |
6-15/16" |
2-1/16" |
15 |
| Stop Ass'y |
$775.00 |
Fit's any of the three tools above |
More Fence Tools
 |
Notch Pipes
Take square tubing or channel and pierce square holes to make the horizontal rails of a picket fence panel. More > |
 |
Power Units
Do you need to notch tubing or pipe to make 90° for gates, fence panels, barriers or livestock corrals? Click on the notched tubes on above, to view our Arc-Fit method of tube and pipe notching. More > |
 |
Pierce Tube or Channel
Our hydraulic 110V units will power your Picket Fence tooling and Arc-Fit notching tooling used for gate and panel manufacturing. Click on the link or the picture above for more information. More > |
Frequently Asked Questions | 
